Blog

In response to the question, it is true that keyless vehicles are substantially easier to steal. In light of this, the answer depends not only on the facts but also on the model under discussion. Certain models include keyless entry, which allows the doors to unlock when the key is nearby, but a traditional key must still be physically placed into the ignition in order to start the vehicle.

The relay system is most likely to be utilized to steal automobiles with keyless entry and keyless start capabilities. Due to the fact that relay theft is no longer unheard of, automakers have been devoting a great deal of work to developing protection against it. As a direct result, some of the most advanced models are pre-equipped with safety systems that have been specifically designed to combat the theft of keyless vehicles. Even with the currently available electronic starting systems, there will always be technologies capable of outsmarting the systems. Keep in mind that automakers are required to provide dealership service departments with equipment that can start a vehicle if the owner or driver has lost the key fob. This extremely unique technology was initially made available only to dealers. However, at some point in the future, it will need to be made available to non-dealer repair facilities.

The equipment is rapidly circulated to the general population and eventually falls into the hands of car thieves. The transceiver contained within a keyless fob is capable of both transmitting and receiving encoded radio signals. When the key is no longer within range, the automobile will send these unique encrypted signals to the key, which will automatically lock the doors. When the key is within range, the vehicle will send comparable signals to the key to unlock the doors.

When car thieves target a specific vehicle, they are able to gain access to the vehicle without the key by utilizing keyless entry. This permits them to steal the vehicle without fear of getting apprehended. Everything else you can do to make the car more difficult to steal will serve as a deterrent. Additionally, it may be advantageous to store the vehicle in a garage, place a locking post on the driveway, and install other safety elements, such as steering wheel locks, within the vehicle. If you don’t already have one, you should strongly consider placing a tracking device in your car.

In the situation that you are encountering automobiles or key fob concerns at your home or place of business, please do not hesitate to contact Mya Locksmith, which provides a variety of locksmith services.

Call now for a locksmith Fishkill NY

Car key fobs, also called electronic car keys, control car doors, alarms, trunks, and remote starts. Like other electronic gadgets, key fobs can lose signal with time. When this happens, you can reset the key fob without calling a locksmith. This article covers the processes one should follow while programming a car key remote. Read the user’s handbook or look it up online for individual automobile steps. Different manufacturers’ key fob reprogramming processes differ. Car key fob programming requires several stages.

Steps in key fob programming 

Step 1: Activate the Ignition

All doors should be locked while you wait in the driver’s seat with the key in the ignition and the key fob in your possession. Now put the key in the ignition and turn it to the “start” position, but don’t really start the engine.

Step 2: Activate The Lock Button

Press the lock button on the key fob and direct the signal to the receiver mounted in the front of the vehicle, just above the driver’s side mirror. After waiting a few seconds for the remote to power up, press the lock button.

Step 3: Disable the Ignition

Get out of the car immediately and reach for the key in the ignition. Keep going at a high rate of speed, and the car’s system will reset the commands after a short while. You should remove the key from the ignition slot and press the lock button within a few seconds of turning the key.

Step 4: Repeat with the rest of the key pobs

To program additional key fobs, simply repeat the preceding procedures. It is recommended to do so because most car models will delete all other key fobs after one is reprogrammed. To do so, first turn the car off, then press the lock button on the next key fob you’re programming. Remember, there should be no pauses in between these steps or the process could fail. It is possible that not all of the remotes will be properly programmed into the vehicle, necessitating a reset. Some car models need to be programmed multiple times if the process fails because of delays between actions. It is imperative, then, that each key be meticulously reprogrammed shortly after the previous one.

Step 5: Begin Again

After the last remote has been programmed, turn the key but not the engine on to start the process over. Push the lock button on the first keypad to keep the door locked. If the car’s locks make a clicking noise, it means the procedure was successful. To ensure success, check that the locking mechanism on each key fob can be heard. Keep in mind that the precise procedure for reprogramming your car’s key fob will vary from one vehicle model to another. The above procedure is the simplest and most generalizable choice. It works with a wide variety of cars, but you should check the handbook first to make sure it’s compatible with your model.

Call now for a locksmith Fishkill NY

Ever wonder why so many key fobs become bent? When it occurs, it doesn’t seem like something too serious. All we do is insert them into a hole and turn them; it’s not like we’re lifting anything too heavy. However, when you’re in a hurry and running late, that’s when you’re most likely to bend a key. Is it possible for a locksmith to make a duplicate automobile key from a bent original? In a word, yes! Most of the time, a professional locksmith can make a copy of a bent car key without too much trouble. Nonetheless, a number of factors are crucial to keep in mind:

• How bent is the key
  Your locksmith can tell by looking how deep to cut. Most locksmiths have template keys. They simply need to adjust the cuts, starting shallow and increasing deeper until they acquire the appropriate form. If your locksmith can’t duplicate your bent key, you must go to the dealership. This is uncommon. Your local locksmith can usually reproduce a bent key. If you need a new car key, your local dealership can read the VIN code.

• The brand and type of car
  Several car brands, models, and types have different lever positions. A locksmith needs this information to program the key-cutting equipment. They start with small cuts and gradually get closer to the original. A slightly bent key will be read by the machine. If not, they can decode and copy your key in minutes.

• Key type
  Locksmiths can obtain most key blanks. Some brands are restricted, but the average model should be acceptable. Luxury cars have patent keyways. Licensed vendors usually sell these keys. Locksmiths won’t have these blanks. Duplicating a key is easy unless you have a key code card. Otherwise, your locksmith won’t be able to make a copy. Patent keys need paperwork. Your locksmith knows that unauthorized duplication of patented keyways can get you in trouble, so they’ll refer you to your dealer. A locksmith can copy your car key, but they won’t break the law. They have a good name.

• Lock maker
  Locksmiths know all about car-key types. Key complexity is determined by manufacturers. Depending on who made your car key, the process will be simple or complicated.

• Is your key chipped
  If your bent key’s transponder chip was damaged, getting a duplicate will be difficult. Some locksmiths can fix bent keys with broken transponder chips, but not all. It’s tricky. Your locksmith can duplicate your key despite a broken transponder chip. The copy won’t have the chip’s security, but it will work. The locksmith is essential when it comes to duplicating a bent car key. A good locksmith can easily copy a broken or bent car key.

 

Only a certified locksmith should handle auto key emergencies. For troubles, call Mya Locksmith. We’re here to serve you any time.

Call now for a locksmith Fishkill NY

To a certain extent, remote key fobs are wonderful, but eventually they will break. When they do, there is a possibility that you will not be able to get inside the automobile. If you then go to enter the vehicle, you may find that the START button is no longer functional, which will prevent the vehicle from being started. If the battery in your key fob is dead, the system won’t be able to detect if the fob is inside the vehicle, and as a result, it won’t start the engine.

Solutions to a Dead Key Fob

If you find yourself in the situation where you have a dead key fob, there are several options that we may recommend to you.

• Change out the battery.
  In order to get to the battery, you will need to open up the fob. To pry up the battery cover, you will often need to use something like a coin or a little screwdriver. The battery will have the appearance of a silver button. Locate the numbers printed on the battery, then use those to choose a suitable replacement.

• Simply use the key to unlock the door.
  When the primary battery dies in an automobile, nothing else will function. Manufacturers have taken several approaches here, and which one works best for you will depend on the type of key fob and locking mechanism in your vehicle. If you have a traditional key fob in which the key itself is made of metal, that’s the easiest indicator. It’s as simple as inserting the key into the lock and turning it.

• Unlock the car remotely.
  This practical and advanced technological function is quickly becoming standard on all automobiles. If you have the manufacturer’s app loaded on your device (or some other type of emergency system), you can call the manufacturer’s customer service center and have them unlock the car remotely for you.

• A couple of quick presses on the key fob may help.
  If the button on the housing doesn’t push the electronic switch in the right way, it can become unresponsive. It’s possible that pressing it more than once will result in better contact, which will then activate the key fob and allow you to open the car.

• Use the spare key fob if available.
  Another straightforward and sensible option, given that you either already own a spare key or someone is able to provide one to you, When discussing this topic, it is important to point out that each and every motorist needs to always have a fully operational spare key fob on hand.

Locksmiths at Mya Locksmith is the company to contact if you need help with your automobile or key fob. We’re here to serve any time. Call us now!

Call now for a locksmith Fishkill NY

It is pretty much impossible to replace a vehicle key by having a cheap blank replicated and cut at a hardware store like you could do in the past. The vast majority of brand-new automobiles on the market today are outfitted with either a keyless entry system or a push-button starting system, or both. Modern key fobs are convenient, but they can be expensive to replace if they are lost or broken.

Nowadays, if you misplace a key or want an additional one, you will most likely be required to travel to a vehicle dealer or automotive locksmith.

Programming a Key Fob

There are a few different ways to program the key fobs that come with various kinds of cars. The procedure that is described below is the most straightforward technique for reprogramming any remote. To program a key fob at home, you will need to follow these steps:

• Change the batteries in your key fobs.
  If the battery in your key fob goes faulty, reprogramming it might be a big pain. It’s not hard to find a device where the battery is inexpensive and simple to change out. If you are unsure of how to change them, see your user handbook.

• Get inside the car.
  Close all the doors, get in the driver’s seat, and turn on the ignition and remote. It’s important to lock the doors.

1. 1. Start the engine.
      To turn on the electrical system, put the key in the ignition and turn to the “On” position. Do not start the engine until you have verified that the ignition is not set to the radio mode.

• Press the remote key’s lock button.
  When the key is in the “On” position, pressing the lock button on the fob is equivalent to turning the key around to the “Off” position. At the end of each cycle, put the key back in the “On” position to ensure proper operation.

• Listen for the sound of a lock.
  After you have completed the steps in the previous section, you will hear the sound of the lock being engaged. It appears that you have successfully entered the programming mode when you see this message. After this has been completed, you will need to press the lock button once more during the next five seconds for the programming to be successful.

• Programming extra remotes.
  You may successfully program any extra remotes by pressing the lock button within 10 seconds of entering programming mode.

• Turn off the ignition.
  To finish the programming operation, you need to make sure that the ignition is set to the “Off” position.

1. Get out of your vehicle and evaluate the situation.
   Don’t forget to remove the key fobs before you leave the car. The operation of both locks should be tested with the configured key fobs.

If you need auto locksmith services, the professionals at Mya Locksmith are ready to help. Contact us now!

Call now for a locksmith Fishkill NY

It is an undeniable fact that we live in a world full of daily advancements. Our lives will be uncomfortable without the intervention of modernization. Hence, locksmith companies are also adaptive to these and apply such technology to add adherence to have a quality-based output.

These high-tech devices are a big help in giving outstanding results when it comes to locksmithing. Here are some of the advancements made by locksmith companies through the support of new technology.

Card access entry system

Card access entry system is used by businesses such as hotels, restaurants, and other commercial buildings. This system can be easily rekeyed and can manage a home, commercial building, office, and other spaces.

This intervention helps the locksmith industry expand and improve its services and expertise.

Smart lock technology

Smart lock technology is affecting the locksmith industry in multiple ways. Thus, this invention is the best feature in securing modern locking mechanisms, like electrical locks, using applications that send a coded signal.

A wireless coded signal is the new physical key. It gives convenience and comfort to automobiles, resort doors, lockers, home entry doors, gates, and secure people and property.

This system provides big help to every home, business, and car owner.

Locksmithing and keyless entry 

Modern technology continues to give life and comfort to every individual. Hence, many adapt to this change and patronize its benefits.

One of the best that modernization has brought us is the keyless entry devices. It takes over the place of a traditional key. It has a hidden touch-activated keypad. This system is widely used in cars that within a few yards by only pressing a button on the remote, you can lock or unlock the doors and do other functions.

If you need a committed and expert locksmith to provide you with such technology, our company is best for you.

Erez locksmith is a prominent company built over the years that is qualified to do any locksmithing job. We have modern tools that can surely meet your standards and needs. With us, we assure you that you get the best on what you pay.

Whenever you plan to acquire one of the systems mentioned above, don’t hesitate to contact our hotline. We are open beyond business hours, even on holidays, to provide you with 24/7 services.

Doors have different features of locks depending on clients’ needs and wants. If you are a business owner, security is your top concern. When it comes to your establishment’s security, you have to be skeptical. You may not know who can break into your property.

We have to be knowledgeable when it comes to security, including keys and locks. There are few methods of securing entry points to a place of business or home.

Card Readers

Card readers are the most recognized method for securing all door types. This system relies on cards that are issued only to designated people. It is flexible and only allows a specific individual to have different access in each room or department.

There are three ways that a card can be read. Through a bar code, magnetic strip, or RFID.

Barcodes need to be held near the card reader so that it can scan them. It can be the easiest of the three.

Magnetic strip, this method requires the cardholder to swipe the card through a card reader.

An RFID card does not have to be displayed to be read. This type of card is suitable for delivery drivers, which doesn’t require to be near the card reader to open a door.

Keypad Controls

Keypad control can use a single password or number for everyone. Thus, you can assign different codes to chosen individuals. This method has an advantage over a card reader. If your keys become stolen from you, they can’t access your property even if they have the card in their hands.

Phone Entry Systems

A phone entry system is like a CCTV system. It requires a live person to let anyone in. In this system, a voice system is being used and traced. This method is highly advanced in that you can assign code words to anyone using this system.

If you are interested in acquiring one for your home or business establishment, contact our company hotline.

Erez Locksmith is known to be affordable and quality-tested in providing security in any home and business size. We have licensed and qualified locksmiths who can do the job with care and precision. We look forward to hearing from you.

Call now for a locksmith Fishkill NY

Better locks mean better security. Whether you are a homeowner or business owner, we always prioritize security to keep our family and investment safe from the hands of criminals.

Regular security check-ups are good to ensure our protection. Hence, our door locks need to change if we experience such situations listed below.

After a theft or break-in

Break-in and robbery in your home is a stressful event in our lives. Losing our valuables and thinking of starting over again is a drastic feeling. Hence, when this happens, and we begin to take every piece back again, we don’t want criminals to do the same thing in our homes.

After a break-in, you have to change your door locks immediately. You do not want another tragedy to repeat. Contact your trusted locksmith so they can assist you.

Change in staffing

If you are a business owner and terminated a disgruntled employee, you also need to change your locks. As they leave your company, you have to make sure that there’s no way left they can access your property. It will protect your business from any threats or physical attacks.

When someone moves out

When a roommate moves out of your property, it is best to change your door locks even if you are on good terms. Hence, it will protect you from any future threat if he lost his key or might have been stolen by anyone. By doing so, you are confident to sleep at peace, knowing you are secured.

When your keys have been stolen or lost

If you think that your keys are lost due to someone stealing them, you have to replace your door locks by then. Replacing your locks can ensure that no one can still access your home, even if someone has your old key.

You can hire a local locksmith to help you replace your locks and keys.

When your locks are damaged 

A faulty lock is a loophole that robbers can take advantage of to your property.

Locks also wear out or become damaged through the use of physical force. If you find that your locks are faulty, it is best to replace them ahead rather than lose your valuables and peace at home.

At Erez Locksmith, we are knowledgeable people who can evaluate and perform necessary solutions whenever you experience such an event. Call our number, and we will do our best for you.

There are various ways we can protect our assets. Everything is changing from time to time, and that includes our locks and keys.

Since our doors are our front line of defense, it is an inevitable fact that homeowners and business owners must emphasize the quality of their doors and locks.

There are a vast number of options you can take depending on your needs and standard. Today, we will learn about the difference between mechanical locks over electronic locks.

What is a mechanical lock?

Mechanical locks are standard door locks. They existed around a hundred years ago and provide simple lock solutions without using batteries or electronic devices to operate.

There are four types of mechanical locks around the market:

Mortise lock

It is the type of lock that is common to us. It provides advanced security to the property owners, this type of lock is quite tough to install.

Cylinder lock

Cylinder lock offers different cylinder formats for varying levels of security. However, when there is pressure, it can be vulnerable, and a lock can break.

Spring bolt

A spring bolt is a spring-loaded bolt with an angled edge.

Deadbolt

A deadbolt is a type of lock that moves by turning a knob or key without a spring. In this method, you need a key to open.

What is an Electronic Lock?

Electronic door locks nullify the need for a traditional key. They can be controlled or monitored through a smartphone.

Coded entry

Coded entry is the most common type of electronic lock. A keypad is placed outside the door, and a code is needed to unlock it.

Smartphone-operated lock

These locks usually need an app. It includes a monitor, so you can receive alerts when a stranger tries to break into your home or office.

Biometric

Biometric door locks operate through a fingerprint, so all you have to do is place your finger on the lock to access and enter.

Key fob/key card

Key fob or key card locks are electronic door locks that you need to touch the key fob/key card to the touchpad.

Erez Locksmith has all these types of locks of your choice. We can help you find suitable and affordable locks that will meet your standard. When it comes to locks and security, we are your best pick around the town. For a free estimate, you can contact us.

If you are moving into a new place, many would recommend changing your lock and keys, for you will never know who might enter your front door. Whether you are renting a space for your business or you are renting a new home, you have to ensure proper security that no one has left access to your property.

Many believe that replacing and changing the locks is the only option when it comes to strengthening their security. Hence, there is still a cheaper and quicker option than replacement.

Before you make a firm decision, it is best to have a complete understanding of certain things.

In this article, we will help you know the difference between rekeying and locks replacement. When should it apply to our situation?

What is Rekeying?

When you rekey your locks, you are modifying the lock mechanism so that the old key cannot access it. Your physical lock remains the same while new keys are necessary. Hence, rekeying is known to be a quick and cheaper option.

When to rekey?

In situations like you have lost an extra old key. And it gives a big worry that someone might find and access your home, you can rekey your locks so the old key can’t work anymore.

If you are still unsure about rekeying, a locksmith can help you determine your case.

What is lock replacement?

Lock replacement is a more sophisticated task to do. It involves replacing both your locks and keys. It is a little more expensive than rekeying. Hence, it is best when you want to tighten or upgrade your security.

When does lock replacement become necessary?

If you move into a new home, changing the lock of your door becomes a priority. You will never know how many previous residents, plus their family and friends, have a spare key.

If your keys are lost or stolen, you are never sure who got them. If this happens, we recommend changing your door lock immediately.

At Erez Locksmith, we help our customers understand and determine which solution suits them and their situation. We never let anyone get stuck in a drastic moment. We are prompt and quick in responding no matter how easy or challenging the work is.

Hiring us is your best pick. You can rely on us 24/7, state your concern, and we will be on your doorstep.